Q-See QSDR04RTC Bedienungsanleitung PDF herunterladen (Seite 27)

User Manual

Click Play button on the bottom left corner (red box in first picture below) to connect to DVR. After

connecting, CH1 will display as shown in the second picture below. You can change to CH2 by push # 2 (red

box in second picture below).

If you have an 8 camera system you would click on the down arrow in the bottom row (red box in first picture

below) to view the buttons to access the next 4 cameras (as shown in the red box in the second picture below).

If you have a 16 camera system continue to click on the down arrow to access the rest of the cameras.

If you like this application, please leave good feedback in appstore.

5.2.6.5 Motion Detect

Click [MainDeviceMotion] to enter into the [Motion Detection]

menu to setup motion detection recording.

The [Motion detection] Menu has three sections, including

Channel Status, Sensitivity and Motion area.

Channel STATUS: This option allow you enable motion detection

on any channel.

SENSITIVITY: This option allows you to set sensitivity level of

motion detection from 1 to 4 with 4 being the most sensitive.

Picture 5-38

MD AREA: This option allows you select the area you want to be

sensitive to motion. The channel is separated into a 13*10 area. When

any object moves into the motion detection area, and the area where

the object is located is displayed in red recording will be triggered. In

the semi-transparent area the motion detection is off.

Picture 5-39

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 40 41

Keine Kommentare

Q-See QSDR04RTC Bedienungsanleitung Seite 27