Q-See QSD2216 Bedienungsanleitung

10 2. Open/Close output A: N.O. Normal open, close when triggered. DVR must set as low voltage alarm. B: N.C. Normal close, open when triggered.

11 3.4 Hard Disk Connection There are processing to install the hard disk. Note: If the DVR comes with a HDD pre-installed then skip the following st

12 4. REMOTE CONTROLLER 0 – 9, 10+: Select the channel (Full screen) 2x2: 2x2 Screen Modes 3x3: 3x3 Screen Modes 4x4: 4x4 Screen Modes USB: USB Sto

13 If you enter the correct password, the main menu will display ad below.

14 5.2 SYSTEM SETUP Press “ENTER” button to enter sub menu PLAY REPEAT: Set the Playback Repeat VIDEO SYSTEM: Set the NTSC/PAL BUZZER SOUND: Set

15 5.2.2 HDD FORMAT SET Format the hard disk. Select “YES”, to format the hard disk. And all video on the HDD will loss. 5.2.3 FACTORY RESET Init

16 5.2.4 Change Password When the cursor moves to CHANGE PASSWORD, please press the enter button, and the Change Password window will appear. Pass

17 5.2.5 Firmware Update When the cursor moves to FIRMWARE UPDATE, please press enter button, and the firmware update window will appear. Update Met

18 5.3 DISPLAY SETUP BOUND COLOR: Set the Color of Video Boundary (BLACK / WHITE / GRAY). BLANK COLOR: Set the Background Color of Loss Video (BLA

19 Each channel’s name is a combination of six eight characters. Press up or down button to select each character, press LEFT or RIGHT button to modi

2 Before installing stand alone DVR, be sure to thoroughly review and follow the instructions in this Users Manual.

20 5.3.3. AUTO SEQUENCE SET When the cursor moves to Autoseq Set, please press enter button, the Auto Sequence Setup window will appear. Press the

21 REC SPEED: the recording frame rate of the DVR, factory default setting is 30F/SEC under NTSC (25F/SEC under PAL). This means the DVR records the e

22 5.4.2 REC CH SET When the cursor moves to REC ch Set, please press enter button, the REC ch setup window will appear. This screen is different fo

23 IP MODE: the DVR has 2 IP modes, STATIC IP and DHCP, if you select STATIC IP, you can set the IP address manually, if you select DHCP mode, the DVR

24 5.5.2. MAC SET When the cursor moves to Mac Set then press the Enter button, the Mac Set window will appear. If you have more than one DVR in a

25 ALARM ENABLE: alarm trigger switch, can be set to off, N.C(normal closed) or N.O(normal open). If users set it to off, the DVR will ignore the alar

26 When in night as below, please set to normal level. Note: the above suggestions are a guide only based on testing in a general environment. You

27 5.7 SCHEDULE SET When the cursor moves to Schedule Set, press the Enter button, and the schedule setup window will appear. You can change a recor

28 5.9 STORAGE INFO When the cursor moves to Storage Info, press the Enter button, and the storage info window will appear. MODEL: Model Number of

29 CHANNEL SEL: If you have a speed dome camera, select the channel which the camera is connected to. BAUD RATE: Changeable from 1200bps to 115200bps.

3 1. This document is intended for both the administrator and users of this stand alone DVR Model. 2.This manual contains information for configuri

30 6.4 Alarm Recording Alarm recording is not started by manually pressing the Record button, it is automatically activated once Schedule mode is en

31 recording is playing to see faster playback. Press the PLAY button to return to normal speed playing from the current place. Continuous pressing of

32 6.8 Time Search Move the cursor to Time Search, then press the Enter button and the Time search window will appear, which is illustrated as below

33 If you want to search from MASTER HDD to SLAVE HDD, press the SERACH button, and then press Enter button. Press the Menu button to exit. 6.10 Rec

34 If you want to change it from the MASTER HDD to the SLAVE HDD, press the SEARCH button, then press Enter button. Press the Menu button to exit.

35 6.12 USB Update Using your PC to create a folder called “firmware” in the root directory of your USB memory stick, copy the update files to the fol

36 6.14 Information Display In shift mode, press display button, the main information of the DVR will display on screen. HDD SIZE: the size of the

37 You can press up, down, left, or right buttons to move the speed dome, and press the Enter button to stop. If you press the Iris button, the char

38 6.16 REMOTE CONTROLLER 7. USING THE NETWORK VIEWER Using the net viewer software, you can view the DVR through Internet or In

39 7.1 Setting Please click button, you will see the window below: Enter the IP address and click “OK” button. 7.2 Viewer connect Press botto

4 CONTENTS 1. FEATURES AND FUNCTION…………………………………………………………………….…..5 2. UNIT DESCRIPTION OF FRONT PANEL.…………………………………………………..……….6 3. REAR PANEL AND S

40 7.3 Live play Click play button to see live picture, 7.4 Playback After clicking “Playback” tab, net search window will display. First, you ha

41 7.5 Scandisk Connect the HDD that used in the DVR to a PC and then select Scandisk, Scandisk window will display, click and select one HDD, then

42 7.7 Save to AVI To record the video to your PC’s HDD with “.avi” file system, just click" AVI" button, and the following window will

43 7.8 Save to DVR To record the video stream to your PC’s HDD , just click" DVR" button and the video stream will be saved in the director

44 8. Main standard & parameter chart Item Specification Compressed picture M-JPEG Video signal NTSC/PAL Video input Conposite:1.0Vp-p/75Ω,

45 9. Trouble shooting guide Q. What kind of camera should I buy for this DVR? A. Any BNC or RCA interface indoor/outdoor/infrared camera will work wi

46 Q. Why cannot I access Time/Date Set, HDD Format Set, Record Set menu? A. Please stop record or play before you access these menu. Q. Why canno

47 Q. How do I change the On Screen Display (OSD) language on the DVR? A. You can change the OSD language from the default English to German, French,

48 11. Internet View/Playback Configurations 11.1 About Networks Users will generally use the following network types and hardware: 1): Local Area

49 3): In case you connect to Internet by proxy server, users should utilize port mapping software and open ports 5000, 5001, and 5002 for the sur

5 1. FEATURE AND FUNCTION l Video input: 16channels; Video output: 3channels. l Audio input: 4channels; Audio output: 2channels. l 16 alarm input a

50 As ADSL and CABLE MODEM network users usually use dynamic IP address, so once the MODEM restarts, the IP addresses will change. For this situati

51 Q-SEE Product Warranty Thank you for choosing our products. All of our products users have a conditional free warranty repair service for hard

52 Customer Information Card User’s Name Mr./Mrs. Company Name Postal Address Postal code Phone Number E-mail Model Number of Product Se

6 2. UNIT DESCRIPTION OF FRONT PANEL 2.1 Recording/Playing Control Buttons Area 1. REC: It is manual recording button. Press this button to record

7 1. Auto/1: Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set

8 11. SF/0: Single frame forward button, in shift mode, while in playback state, long press this button can see single frame forward, press play but

9 3.1 Back panel and connection terminals The power cable and input, output signal terminals are all at the back of the machine, the connection to mo