Q-See QT608 Wartungshandbuch PDF herunterladen (Seite 6)

10 11

You may view this DVR using an HDMI or standard 19” (or larger) VGA monitor or a television. The HDMI

and VGA ports are on the back panel of the DVR along with the CVBS port for the television which uses

a BNC connector. Your system includes an HDMI cable but you will need to provide your own VGA

cable if you choose to use a monitor with that connection. Similarly, we have included a BNC-to-RCA

adapter, but you will need to supply your own RCA video cable. Your DVR is conﬁgured to use the HDMI

or VGA port as the main display. To use a TV, you will need to press and hold the STOP/ESC button for

approximately 10 seconds until you hear a beep indicating that the video mode has been switched. A

display connected to the other port will not show the menu.

CONNECTIONS AND CONTROLS

CHAPTER 2

2.1 DVR FUNCTIONS AND CONNECTIONS

FRONT PANEL

REAR PANEL

QT604

ITEM NAME FUNCTION

1 RECORD Manually begins recording

2 LED

INDICATORS

Show status of power, HDD, record, etc.

3 DIRECTION/

MULTISCREEN

1. Navigate through on-screen options

2. Change screen display mode between 1 and 4 channels

4 IR RECEIVER Receives signals from remote control

5 ENTER Conﬁrm selection

6 PLAY/PAUSE Launches PLAYBACK window.

Starts or pauses video.

7 REWIND Reverses video direction

8 FAST FORWARD Changes playback speed

9 STOP/ESC Quit PLAYBACK mode/Exit the current window or status

Switch video output mode. (Press and hold 10 seconds)

10 -/BACKUP Decrease the value in SETUP/Enter backup mode in LIVE VIEW

11 +/MENU Increase the value in SETUP/Enter menu in LIVE VIEW

12 SEARCH Enters Search Mode

13 USB USB port to connect USB ﬂash or external hard drives to update

ﬁrmware or back up recordings

ITEM NAME FUNCTION

1 AUDIO IN 2-Channel audio input for microphones or cameras equipped with audio.

Audio will be assigned to channels 1 and 2.

2 AUDIO

OUTPUT

Connection for audio output – connect to an ampliﬁed speaker

3 CVBS (Video

Out)

Video output for connecting to TV (BNC) or monitor

4 DC +12V Power input

5 SD VIDEO IN Video input from up to 3 standard deﬁnition analog cameras

6 HD VIDEO IN Video input from 1 SDI high deﬁnition camera

7 VGA PORT Video output for connecting to monitor

8 HDMI HDMI video output

9 LAN Network (ethernet) port

10 USB PORT Connect USB mouse

11 PTZ PTZ camera connection ports

BACKUP PLAYNET

REC

HDD

REC

Menu/+

Backup/-

/ESC

Enter

4 Channel QT604

1 2 3

4 5

7 8 10

6 9 12 1311

1 2 3

7 8 10

6 95 11

NOTE! HD cameras MUST be connected only to the port marked “HD SDI

IN” in order for them to work. Similarly, the analog cameras will only work

when connected to any of the three “SD VIDEO IN” ports.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Q-See QT608 Wartungshandbuch Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Q-See QT608