Q-See QC3016 Wartungshandbuch PDF herunterladen (Seite 30)

58 59

In the case of a hard drive error, the system will come directly to this menu. An error may be

indicated if the hard drive time and system time do not match. To resolve this issue, adjust

the time in the General setting menu located in the Setting menu (See Section 4.3) and

restart the system. Formatting the drive, using HDD Manage as described in Section 4.4

Advanced is another possible solution to drive errors.

If the drive is damaged or missing, you will need to install a drive. Please see Chapter 6 for

hard drive installation instructions.

Select View Recording Times to show ﬁles recorded on the DVR.

LOG

Any activity on the DVR is logged and

recorded on the system. This information can

be viewed and searched from this window.

PICTURE 4-4

PICTURE 4-5

Information on user access, system

shutdowns, changes in recording status,

video loss and etcetera are listed. You can

search for activity in a similar manner to the

ﬁle search. This information can be backed

up to an external USB drive in the same

manner as video ﬁles and it will be saved as

a text document that can be opened by a

word processor, NotePad or other text reader

application.

PICTURE 4-6

PICTURE 4-7

VERSION

This display shows system hardware and ﬁrmware speciﬁcations.

The hardware data shows the number of

channels the system is conﬁgured for along

with the number of alarms in and out that can

be utilized. The system’s serial number is also

displayed, along with the version and build

date of the ﬁrmware.

You can update the ﬁrmware using this menu. Check your product’s page at www.Q-See.

com/Support to see if you have or need the latest version of the ﬁrmware. If your system is

operating without problems, we recommend that you do not update the ﬁrmware unless there

is an added feature that you need. To update the ﬁrmware, you must download the ﬁle from

our website and save it onto a removable USB drive that is otherwise empty. Connect the USB

drive to the port on the front of the DVR and press Start.

ONLINE USERS

A list of users accessing the DVR from over the network or through the Internet is shown in

this menu.

The user’s name as well as the IP address

used to access the DVR is displayed.

If you have proper system management rights

(Conﬁgured in Account, See Section 4.4

Advanced for full instructions), you can

disconnect or block a user. The maximum

time a user can be disconnected is 18 hours

(65,535 seconds).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 44 45

Kommentare zu diesen Handbüchern

Keine Kommentare

Q-See QC3016 Wartungshandbuch Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) Q-See QC3016