Q-See QT528 Bedienungsanleitung PDF herunterladen (Seite 9)

16 17

CHAPTER 4 MAIN MENU SETUP

4.2 LIVE CONFIGURATION

Live conﬁguration includes four submenus: Live, Main Monitor, Spot and Mask.

Live Tab

Use this menu to set camera names and adjust picture colors, brightness, hue saturation and

contrast for optimal picture results.

PICTURE 4-9

PICTURE 4-10

You can individually name cameras by

highlighting the ﬁeld for each camera. A

virtual keyboard will appear allowing you to

enter characters, numbers and symbols with

case sensitivity. ENTER will save the name

and return to the LIVE menu. ESCAPE will

exit the keyboard without saving.

Main Monitor Tab

Select the conﬁguration of your display.

Split Mode allows you to choose from single

view, 2x2, 2x3, and 3x3 views on a screen at

one time. You can also select which channels

will be displayed.

Channels can be grouped and the display will

cycle between groups. Any individual channel

can be shown in more than one group.

Dwell Time: This is the time interval the

display will spend showing a group

before moving on to the next group.

NOTE! If viewing remotely on a computer with dual monitors, the display must

be on the main monitor.

PICTURE 4-11

You can conﬁgure the settings for image

saturation, hue, brightness, contrast and

colors individually by clicking on the Setting

button for each individual camera or for all

of them simultaneously by selecting the All

button before making the settings.

Spot Tab

This allows select feeds to be viewed on a separate monitor that is connected to the DVR but

may be in another room, for example. There will be no menu access on this auxiliary display.

PICTURE 4-12

PICTURE 4-13

PICTURE 4-14

Only one channel can be displayed at a

time on this monitor. You can choose which

channels (each channel is a “group”), the

order and their dwell time. The left and right

arrows allow you to move to the next group. A

channel can appear in more than one group.

Mask Tab

Set up masks on individual cameras to block out select areas on each screen. This is to grant

privacy in situations when other users may be able to view the camera feeds and you wish to

restrict viewing of certain areas or activities.

Click on the Setting button next to a given

camera to apply a mask to its view.

Up to three areas may be masked in an

image. Simply click and drag to cover the

area. To delete, double-click on a mask.

Right-click to exit the screen, your masks will

be saved.

The masks will appear on that channel’s

image in the live area as well as on

recordings.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare

Q-See QT528 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) Q-See QT528